The program is compiled and ready to be uploaded to the micro controller. Assuming that you have connected it and powered the micro controller as explained in the Installing HBBR Basic IDE upload it! Go to menu: Project->Program Flash, the upload dialog box Upload to FLASH will appear. Click the Start button, the upload will start. Wait until upload is done and then click OK button.

In the log window you should see messages like below during upload:

Synchronizing ...

Port opened COM1:

Synchronized!

Processor has been RESET

Boot loader responds

ID Read : 67305253

FLASH write buffer size : 256

Number of bytes to send : 0

Sector : 0

Bytes in sector erased : 4096

Bytes sent : 256

..

Sector : 5

Bytes in sector erased : 4096

...

Bytes sent : 22032

Done!